Wacker Neuson - Home
Climate Technology
 
Home
Home Products How it Works Jobsite Solutions Tradeshows News Contact Us  
Spacer
 
Dealer Locator
Hydronic Heat
Air Heat
Drying
Cost Estimator
 
 

Drying Systems : Dehumidifiers : Air Movers

Drying: Dryvex MC5200Wacker Neuson dehumidifiers, air movers and drying systems will keep your construction and restoration projects on schedule and on budget. These products create the ideal environment with dry, hot air to remove excess moisture and help prevent the growth of mold and bacteria. The drier the surrounding air becomes, the faster moisture will release from saturated materials. Using advanced technology, these drying systems dry flooded buildings quickly, reducing business interruption time.

Water Damage Restoration and Moisture Removal with Dryvex MC5200 Drying System
Dryvex AD 75LGR Dehumidifier

Dryvex MC5200 Drying System

  • 5,200 cfm airflow rating
  • Onboard diesel generator
  • Digital display of relative humidity and temperature
  • Simple controls for easy monitoring of drying application

more on Dryvex MC5200  Pdf165KB

Dryvex AD 75LGR Dehumidifier

  • 300 cfm airflow rating
  • Hour meter
  • Condensate pump ystem
  • Electronic controls
  • Energy-efficient compressor
  • Optional washable mesh filter

more on AD 75LGR dehumidifier   Pdf 174KB

   
Dryvex R55 Dehumidifier
Dryvex AM3000 Air Mover

Dryvex R55 Dehumidifier

  • 294 cfm airflow rating
  • Hour meter
  • Condensate pump system
  • Washable mesh filter
  • Energy-efficient compressor
  • Optional remote humidistat control

more Dryvex R55 dehumidifier     Pdf 1.4MB

Dryvex AM3000 Air Mover

  • 3000 cfm at 1" w.c static pressure
  • Low amp draw allows 6 units from one 120v, 15 amp power connection

more on AM3000 air mover   Pdf 201KB


Accessories

Click to download accessories sheet…Pdf 580KB

Outside the Americas

Subfreezing temperatures create a number of unique challenges throughout the world. Wacker Neuson Climate Technology is your global solution to quickly and efficiently thaw frozen ground, cure concrete and provide clean dry heat to structures.

E 700M Delivers the Heat for Bickhardt Bau Bridge Restoration Projects
- Siegen, Germany

E 700M Delivers the Heat for Bickhardt Bau Bridge Restoration Projects

A two-part synthetic resin used to protect concrete on bridges from corrosion requires a minimum structure temperature of 41° F to properly work. When subfreezing winter temperatures stopped work on a bridge restoration project, Bickhardt Bau used the E 700M to quickly heat the structure above minimum temperatures, keeping the job on schedule.
Click to read more…
Pureheat Delivers Significant Advantages in Underground Tank Application
- Dromore,Ireland
Pureheat Delivers Significant Advantages in Underground Tank Application
Rather than running ductwork to use the old standby of indirect-fired heaters for heating a 1.78 million ft3 underground potable water tank, John Grahams chose the clean, dry heat offered by the Wacker Neuson Pureheat system. In doing so, Grahams realized a fuel savings of over $1,000 per 72 hours of use.
Click to read more…
Wacker Neuson Heating Equipment Makes a Splash at Danube Swimmers’ Ball
-
Neuburg an der Donau, Germany
Wacker Neuson Heating Equipment Makes a Splash at Danube Swimmers’ Ball
A creative solution found the HP 252 and E 700M hydronic heaters teaming up to comfortably heat a 187,167 ft3 tent and 2,690 ft2 dance floor at the Danube Swimmers’ Ball. As outside temperatures dropped to 14° F outside, the environment inside the tent was comfortably maintained in the mid-70° F range.
Click to read more…
Contact

Wacker Neuson
N92 W1500 Anthony Avenue
Menomonee Falls, WI 53052-9007
Tel: 262.255.0500
www.wackerneuson.com
Email Us

 
Top
     
Dealer Locator | Hydronic Heat | Air Heat | Drying | Cost Estimator | Contact Us
Home | Site Map | Imprint - Site Policies

© Wacker Neuson