Surface Heater E3000 Lifting Bale:
A quick pick-me up

One of the most popular hydronic surface heaters in the Wacker Neuson Climate Technology line, the Ground Heaters E3000 is now even more user friendly for the contractor and dealer. A new, frame-integrated lifting bale affords easier and safer trailer loading and unloading and more flexible mobility around the jobsite.

Located at the top front of the unit, the CSA-approved bale offers a convenient single lifting point, eliminating the need to straddle the axles when lifting the heater. Featuring five holes strategically positioned at different angles, the new lifting device gives a well-balanced picking point no matter the level of fuel in the tank.

With net heater output of 321,000 BTUs per hour, the Ground Heaters E3000 quickly thaws frozen ground, cures concrete, prevents frost or provides structures with clean, dry air heat. Featuring one pump per hose loop to deliver more BTUs per hour to the project than other units, the E3000 comes standard with 3000 ft of hose to thaw 3,000 to 6,000 ft², cure up to 6,000 ft², or prevent frost over areas reaching 9,000 ft².

Available accessories enhance machine versatility and increase the thawing, curing and frost prevention capacities to 6,000, 18,000 and 27,000 ft² respectively. By equipping heat exchangers to the unit, the E3000 offers a high air heat capacity reaching 535,000 ft³.

Looking for a quick pick-up? Then try the Ground Heaters E3000 hydronic surface heater from Wacker Neuson Climate Technology.