|
|
|
MOST User-Friendly Design |
|
1. Flip 3 switches
2. Lay out the hose
3. Place vapor barrier & insulation
That’s it! No complicated manifolds.
No valves to
open or close. No hoses to connect. Why do it the
hard way? Ground Heaters’ long hoses allow easy,
flexible setup for all applications.
It doesn’t get any easier than a
Ground Heater.
™
|
|
Ground
Heaters
Deliver the Most Heat |
|
|
1 pump per hose loop
(fastest flow rate)
+ Highest net
BTU’s (super-efficient
heater)
= Most BTU’s to job surface
(for fast thawing and consistent
concrete curing)
|
|
|
|
| •
Thaw ground
- quickly,
easily, and economically |
- 3,000 - 4,500 sq.
ft. standard
Varies based on soil conditions. Complete a Ground
Heaters’ Thaw Cost Plan.
|
|
• Cure concrete -
in cold weather with confidence |
- up to 6,000 sq. ft.
standard
Varies based on application. Complete a Ground
Heaters’ Cure Cost Plan.
|
|
|
• Up to 120 hours run-time
• Engineered for reliable,
trouble-free start
• Easy to operate
• Economical
• Dependable
• Built Tundra Tough™
• 84% heater efficiency -
highest in the industry |
| Thaw and cure
large areas: |
• Thaw up to 1 foot
deep/day (dependent
on conditions)
• Set, finish and cure concrete like it’s summer
• Protect newly poured concrete from frost |
|
Ground Heaters
have changed cold weather construction forever!
|
Based
on years of testing and experience, Ground Heaters products
are the most efficient, durable, and
user-friendly portable hydronic heating systems
available. |
|
|
|
|
|
Add Optional Accessories to Thaw Faster,
Cure Larger Areas, or Heat
Workspace |
 |
  |
 |
|
Hose Handling Systems
Easy use and storage of
additional Heat Transfer Hose
|
Pump Packs
Thaw faster; provide
uniform heat for curing large areas of concrete; single or dual |
Heat Xchangers™
Provide temporary air heat for interior workspaces; 3 sizes
|
|
To heat
larger spaces, ask about
NEW
Arctic Bear and
Pureheat
Air Heaters™.
|
|
Machine Details
|
Positive Displacement Pumps |
Positive Displacement Pump:
provides maximum flow and assures
consistent heat delivery for thawing and curing. One pump per
hose loop means more BTU’s/Hr delivered to project than other
hydronic heaters. Plenty of power to pump Heat Transfer Fluid
250 feet up from Ground Heater, allowing Ground Heater to remain
below cure site (such as
a bridge deck). |
Performance Monitoring System |
Performance Monitoring System:
strobe light indicates from a
distance that all systems are operating properly. Can be
connected to dialer, transmitter, or other remote alert device. |
|
Digital Temperature Controller |
Digital Temperature Controller:
with push button adjustment. Allows
operator to easily adjust Heat Transfer Fluid output temperature for
all applications. |
|
Roll Up Doors |
Roll Up Doors:
provide superior performance in windy
conditions. Lock for security. |
Optional Generator |
Optional Generator:
2800 rpm Onan liquid-cooled
diesel, 5.5kw |
|
|
Specifications
|
|
Dimensions and capacities |
(no generator/with
generator) |
Length
Width
Height
Ground clearance
Appx.
Weight w/o fuel
Appx.
Weight with fuel
Fuel capacity
Heat Transfer Fluid
Pumps,
265 gph positive displacement
Hose (2 x 1500 ft)
Hose reels
Hose rewind
Circulation loops
Tires
Hitch |
171"
79"
85"
12"
5,300/5,855 lbs
6,614/7,139 lbs
178 US GAL
112 US GAL
2
3,000 ft
1
120V AC electric,
w/ 12V DC clutch
2
LT235/85R16
25/16" ball |
|
|
Additional Information |
Brakes
Tie Downs (for transport)
Ground fault interrupt
Main circuit breakers
Burner motor thermal protection
Burner Ignition
High temperature shutdown
No-flame shutdown
Low fluid shutdown/warning light
Vented closed loop circulation
Hydronic heater operating pressure
Temperature gauges
Pressure gauges
Interior light, 120V AC*when not
using on-board generator
|
12V
DC electric
4
yes
2
manual reset
electronic
yes
yes
yes
yes
0 psi
2
2
2 |
|
|
Performance |
Heater, gross output
Heater, net output
Heater, efficiency
Temperature controller
Fuel consumption at full load
Fuel requirement
Run time
Electrical requirement
Normal operating temp
Normal hose operating press. |
280,000
BTU/H
240,000
BTU/H
84%
digital
2.00/2.40 US GPH
winter blend diesel
up to 120 hours
2 x 20 amps x 120V AC
165ºF - 180ºF
70-110 psi |
All specifications are subject to change
without prior notice. |
|
| |
HTF flow rate per loop
Thawing capacity (std equipment)
Thawing capacity (w/ accessories)
Curing capacity (std equipment)
Curing capacity (w/ accessories)
Frost Prevention (std equipment)
Frost Prevention (w/ accessories)
Air heat capacity (w/ accessories)
Performance monitoring system |
265 US GPH
3,000-4,5000 sq ft
NA
6,000 sq ft
NA
up to 9,000 sq ft
NA
120,000 cu ft
No |
|
Your Ground Heater dealer
carries a complete line of parts
and accessories and will help you configure a
Ground
Heater
system
to best suit your needs.
The E2200
Ground
Heater is
certified,
and complies with
US NHTSA
and
Transport
Canada
regulations. |
|
|
